Tremec TKX 5-Speed Install in the 1965 C10! | Shop Truck Finale!
20.1 هزار بار بازدید -
3 سال پیش
-
Parts Links (not sponsored):Tremec TKX
Parts Links (not sponsored):
Tremec TKX - https://www.summitracing.com/parts/aw...
Clutch Disc - https://www.summitracing.com/parts/ct...
Slip Yolk - https://www.summitracing.com/parts/sd...
Transmission Mount - https://www.summitracing.com/parts/su...
Clutch Housing - https://www.summitracing.com/parts/oe...
36 Spline Steering Coupler - https://www.summitracing.com/parts/hr...
Front Shocks - https://www.summitracing.com/parts/be...
Rear Shocks - https://www.summitracing.com/parts/be...
Wiring Harness - https://www.summitracing.com/parts/AW...
Gauge Cluster - https://www.summitracing.com/parts/ci...
Steering Column - https://www.summitracing.com/parts/id...
Steering Wheel - https://www.summitracing.com/parts/gr...
In this video we did some serious upgrades to the C10! we started by removing the Muncie M21 (which we originally thought was an M22) and installed the brand new 2020 Tremec TKX! It was an easy swap because it was pretty much a direct bolt-up. All we had to do was fab up a quick little transmission crossmember out of some tubing and cut a slightly larger hole in the tunnel. It shifts very smoothly and it's a much nicer driving experience, not to mention how much easier it can maintain highway speeds. While it was on the lift we took the opportunity to swap out the old worn out shocks for some new ones and replace the steering bushing. We got pretty busy towards the end of the build so off-camera we swapped in an Ididit steering column with a Grant steering wheel, a Classic Instruments Gauge Cluster, and Jason installed a new wiring harness. That concludes the 1965 C-10 Shop Truck build and we couldn't be happier with how it turned out! Thanks for Watching!
LINKS TO OUR NEW TOOLS AND EQUIPMENT: https://linktr.ee/BuildBreakRepeatCha... (Amazon Affiliate Links, if you buy something using our links it will help the channel!)
CHECK OUT OUR INSTAGRAM! https://instagram.com/build.break.rep...
-----------MERCH------------
MERCHANDISE CUSTOM DESIGNED BY YOURS TRULY
https://teespring.com/stores/build-br...
--------------TOOLS------------
Eastwood Dimple Dies:
https://www.eastwood.com/eastwood-pun...
Texas Metalworks 40x80 Welding Table
https://texasmetalworks.com/product/f...
RogueFab Tubing Notcher
https://www.roguefab.com/product/vers...
Pro-tools Tubing Bender
https://pro-tools.com/collections/tub...
Optrel Crystal 2.0 Welding Mask
https://usa.optrel.com/en/eye_protect...
Optrel Grinding Mask
https://usa.optrel.com/en/products/au...
---------MUSIC --------
Music - Background and Montage Music Is From Epidemic Sounds
https://www.epidemicsound.com/
Intro Song - Jimmi by Andrew Applepie
Andrew Applepie - Jimmi
Timestamps:
0:00 - Intro and Unboxing
1:35 - Removing the Muncie
4:05 - Installing the Tremec TKX
8:07 - Steering Shaft
8:47 - Replacing the Shocks
9:38 - Test Drive!
11:42 - Interior Upgrades
Tremec TKX - https://www.summitracing.com/parts/aw...
Clutch Disc - https://www.summitracing.com/parts/ct...
Slip Yolk - https://www.summitracing.com/parts/sd...
Transmission Mount - https://www.summitracing.com/parts/su...
Clutch Housing - https://www.summitracing.com/parts/oe...
36 Spline Steering Coupler - https://www.summitracing.com/parts/hr...
Front Shocks - https://www.summitracing.com/parts/be...
Rear Shocks - https://www.summitracing.com/parts/be...
Wiring Harness - https://www.summitracing.com/parts/AW...
Gauge Cluster - https://www.summitracing.com/parts/ci...
Steering Column - https://www.summitracing.com/parts/id...
Steering Wheel - https://www.summitracing.com/parts/gr...
In this video we did some serious upgrades to the C10! we started by removing the Muncie M21 (which we originally thought was an M22) and installed the brand new 2020 Tremec TKX! It was an easy swap because it was pretty much a direct bolt-up. All we had to do was fab up a quick little transmission crossmember out of some tubing and cut a slightly larger hole in the tunnel. It shifts very smoothly and it's a much nicer driving experience, not to mention how much easier it can maintain highway speeds. While it was on the lift we took the opportunity to swap out the old worn out shocks for some new ones and replace the steering bushing. We got pretty busy towards the end of the build so off-camera we swapped in an Ididit steering column with a Grant steering wheel, a Classic Instruments Gauge Cluster, and Jason installed a new wiring harness. That concludes the 1965 C-10 Shop Truck build and we couldn't be happier with how it turned out! Thanks for Watching!
LINKS TO OUR NEW TOOLS AND EQUIPMENT: https://linktr.ee/BuildBreakRepeatCha... (Amazon Affiliate Links, if you buy something using our links it will help the channel!)
CHECK OUT OUR INSTAGRAM! https://instagram.com/build.break.rep...
MERCHANDISE CUSTOM DESIGNED BY YOURS TRULY
https://teespring.com/stores/build-br...
Eastwood Dimple Dies:
https://www.eastwood.com/eastwood-pun...
Texas Metalworks 40x80 Welding Table
https://texasmetalworks.com/product/f...
RogueFab Tubing Notcher
https://www.roguefab.com/product/vers...
Pro-tools Tubing Bender
https://pro-tools.com/collections/tub...
Optrel Crystal 2.0 Welding Mask
https://usa.optrel.com/en/eye_protect...
Optrel Grinding Mask
https://usa.optrel.com/en/products/au...
Music - Background and Montage Music Is From Epidemic Sounds
https://www.epidemicsound.com/
Intro Song - Jimmi by Andrew Applepie
Andrew Applepie - Jimmi
Timestamps:
0:00 - Intro and Unboxing
1:35 - Removing the Muncie
4:05 - Installing the Tremec TKX
8:07 - Steering Shaft
8:47 - Replacing the Shocks
9:38 - Test Drive!
11:42 - Interior Upgrades
3 سال پیش
در تاریخ 1400/06/28 منتشر شده
است.
20,145
بـار بازدید شده