Peugeot 206 airbag warning light, how to fault find using resistors
154.8 هزار بار بازدید -
8 سال پیش
-
How to use a couple
How to use a couple of 3.3 ohm resistors to check out where a fault is in a Driver's Airbag alarm on a Peugeot 206. Most people say replace the Comms 2000 module, which is several hundred pounds to buy new, and may not be the cause of the problem. Use this method to check out the wiring in the Comms 2000 unit before replacing it. Also, a lot of people say you need a diagnostic tool to reset the alarm once the fault is fixed. This video proves that this is not the case.
8 سال پیش
در تاریخ 1395/06/06 منتشر شده
است.
154,882
بـار بازدید شده