BUILD a Sheet Metal Brake! FREE PLANS!
799.4 هزار بار بازدید -
4 سال پیش
-
LINK TO FREE PLANS BELOW!
LINK TO FREE PLANS BELOW! The Sheet Metal Brake I always wanted: 36" glory, cantilever locking mechanism, adjustable fingers, weighs as much as I do! (NOTE: You will want to add 1"x1/2" flat bar to the folding bar for more rigidity)
Subscribe for more!! Only you can prevent forest fires!
Free Plans: https://www.gwellwood.com/tools/sheet...
No, I will not distribute the Fusion360 file. But thanks for asking.
So far:
- Success: 12"/30cm of 0.100"/2.54mm aluminum
- Success: 28"/71cm of 0.039"/1mm sheet steel
- Success: 30"/76.2cm of 18ga/1.2mm steel - with 1x1/2" bar bolted to folding bar
Adapted from: https://www.woodworkforums.com/f65/pa...
Subscribe for more!! Only you can prevent forest fires!
Free Plans: https://www.gwellwood.com/tools/sheet...
No, I will not distribute the Fusion360 file. But thanks for asking.
So far:
- Success: 12"/30cm of 0.100"/2.54mm aluminum
- Success: 28"/71cm of 0.039"/1mm sheet steel
- Success: 30"/76.2cm of 18ga/1.2mm steel - with 1x1/2" bar bolted to folding bar
Adapted from: https://www.woodworkforums.com/f65/pa...
4 سال پیش
در تاریخ 1399/02/30 منتشر شده
است.
799,475
بـار بازدید شده