HOW TO MAKE A LUMBAR PILLOW -- DIY, DAMMIT!
24.2 هزار بار بازدید -
9 سال پیش
-
Cold Meds + DIY =
Cold Meds + DIY = SUCCESS
ORIGINAL DIY: http://francoisetmoi.com/diy/make-a-b...
PRE-ORDER MY BOOK! http://www.diydammit.com
SUPPLIES
table runner from target -- (http://bit.ly/1NeFnJD)
sewing machine with a heavy duty needle
a regular needle
thread
pins
sewing skissors
measuring tape
and something to stuff your pillow with -- can be feathers, can be fiber fill, your choice
DIRECTIONS
1. First you're going to cut the table runner at a spot where the two raw sides look good matching up together. This is going to be your pillow face. It shouldn't measure longer than 33" long.
Remember to allow some space for sewing -- they call that seam allowance. There should be about 3/4" seam allowance on this.
2. Then pin the wrong sides or the back of the pillow face together.
3. Sew the two pieces together and this will make one long pillow face with fringe edges on each side.
4. TO MAKE THE BACK OF THE PILLOW: cut out the remaining table runner piece to the length of your pillow face including the fringe. Leave some extra fabric for seam allowance.
5. Pin the wrong or back sides of the two pieces together, and sew a straight stitch down the two long edges with the sewing machine.
6. Turn right side out, then iron the seams flat.
7. The two ends should be open. Take one end, fold the fabric into the inside of the pillow and pin it into place.
8. Take your sewing needle with thread, double knotting the end. Using a whip stitch, close up the one end.
9. Then stuff your pillow with your filling of choice. Stuff the shit out of it.
10. Using the whip stitch the last open end.
11. Drink tea and eat some chicken soup. You're sick.
ORIGINAL DIY: http://francoisetmoi.com/diy/make-a-b...
PRE-ORDER MY BOOK! http://www.diydammit.com
SUPPLIES
table runner from target -- (http://bit.ly/1NeFnJD)
sewing machine with a heavy duty needle
a regular needle
thread
pins
sewing skissors
measuring tape
and something to stuff your pillow with -- can be feathers, can be fiber fill, your choice
DIRECTIONS
1. First you're going to cut the table runner at a spot where the two raw sides look good matching up together. This is going to be your pillow face. It shouldn't measure longer than 33" long.
Remember to allow some space for sewing -- they call that seam allowance. There should be about 3/4" seam allowance on this.
2. Then pin the wrong sides or the back of the pillow face together.
3. Sew the two pieces together and this will make one long pillow face with fringe edges on each side.
4. TO MAKE THE BACK OF THE PILLOW: cut out the remaining table runner piece to the length of your pillow face including the fringe. Leave some extra fabric for seam allowance.
5. Pin the wrong or back sides of the two pieces together, and sew a straight stitch down the two long edges with the sewing machine.
6. Turn right side out, then iron the seams flat.
7. The two ends should be open. Take one end, fold the fabric into the inside of the pillow and pin it into place.
8. Take your sewing needle with thread, double knotting the end. Using a whip stitch, close up the one end.
9. Then stuff your pillow with your filling of choice. Stuff the shit out of it.
10. Using the whip stitch the last open end.
11. Drink tea and eat some chicken soup. You're sick.
9 سال پیش
در تاریخ 1394/05/22 منتشر شده
است.
24,209
بـار بازدید شده