Cloverleaf Racing Car Modify Part 2
32.7 هزار بار بازدید -
9 سال پیش
-
In part two of a
In part two of a two part series Cloverleaf Racing's Dave Wickham goes through the process of preparing a 1:32 scale slot car for racing on a wooden track surface.
Dave utilizes after market and custom parts to get the most out of a slot car to race on a non-magnetic track.
From new gearing, wheels and silicone tires to race bushings and a new high performance motor Dave walks you through step by step and alerts you to some of the things that you might run up against and shares his tips to getting all of this to look good and fit under the hood.
All of the parts Dave uses to modify the car are available at our on-line store:
www.cloverleafracing.com
Feel free to leave your questions in the comment section below.
Stop by and say hi! On our Facebook page:
Facebook: Cloverleafra..
Don't forget to hit that like button and subscribe to our channel.
Dave utilizes after market and custom parts to get the most out of a slot car to race on a non-magnetic track.
From new gearing, wheels and silicone tires to race bushings and a new high performance motor Dave walks you through step by step and alerts you to some of the things that you might run up against and shares his tips to getting all of this to look good and fit under the hood.
All of the parts Dave uses to modify the car are available at our on-line store:
www.cloverleafracing.com
Feel free to leave your questions in the comment section below.
Stop by and say hi! On our Facebook page:
Facebook: Cloverleafra..
Don't forget to hit that like button and subscribe to our channel.
9 سال پیش
در تاریخ 1394/04/11 منتشر شده
است.
32,731
بـار بازدید شده