Triggering And Decoding Serial Protocols On An Oscilloscope - Workbench Wednesdays
9.3 هزار بار بازدید -
4 سال پیش
-
Everything with a microcontroller has
Everything with a microcontroller has serial busses in it. Busses like UART, I2C, and SPI are very popular choices. When you have a problem with a sensor that uses one or the bus itself, you can use an oscilloscope or logic analyzer to “decode” the traffic. These decoders convert the 1s and 0s into readable HEX or ASCII characters: http://bit.ly/3tJid80
0:00 // Triggering And Decoding Serial Protocols On An Oscilloscope
1:07 // UART and I²C Overview
2:30 // UART
5:16 // I²C
7:28 // Conclusion
0:00 // Triggering And Decoding Serial Protocols On An Oscilloscope
1:07 // UART and I²C Overview
2:30 // UART
5:16 // I²C
7:28 // Conclusion
4 سال پیش
در تاریخ 1399/11/22 منتشر شده
است.
9,320
بـار بازدید شده