Skirting Boards - Glue Removal & Re-fitting after Damp Proof
55.1 هزار بار بازدید -
8 سال پیش
-
In this vid the customer
In this vid the customer was getting remedial injection damp proof work carried out. As such I had to remove the skirtings / baseboards ready for injection damp proofing and re-fit them after re-plastering. A decorator was coming following my work so no need for full finish. This was a trickier job for a number of reasons - the skirting was covered in thick old glue that had to come off prior to re-fitting. Also after the injection damp proof work there were large voids and often nothing to re-attach the skirting to. The workshop was well ventilated while burning the old glue off - don't advise breathing those fumes in! Left caulked ready for undercoat / gloss. Was also kind and undercoated what I could but that wasn't part of the job and the caulk was too wet to do everything!
Read the full article here:
https://gosforthhandyman.com/skirting...
Here's some affiliate links to products I use or would consider using - read more about affiliate links at the bottom of this description:
Combi Drill & Impact Driver Pack:
https://gosforthhandyman.com/uk-links... (UK)
https://gosforthhandyman.com/us-links... (US)
SDS Drill:
https://gosforthhandyman.com/uk-links... (UK)
https://gosforthhandyman.com/us-links... (US)
Join the Member Zone for extra stuff:
https://members.gosforthhandyman.com
Buy locally sourced T-shirts and other lovely stuff from our little shop:
https://gosforthhandyman.com/shop/
Help me let you know about new vids - subscribe to my free newsletter here:
https://gosforthhandyman.com
TOOLS & PRODUCTS I USE: https://gosforthhandyman.com/products...
INSTA: Instagram: gosforthhandyman
I sometimes use affiliate links - these don’t cost you a penny and help to keep this channel going. Read more about affiliate links here - the fairest way of funding the internet: https://gosforthhandyman.com/affiliat... - thanks so much for your awesome support!
All content on this channel is exclusively owned by MacLellan Creative Limited. Copyright (c) 2021. All rights reserved.
#DIY #Joinery
Read the full article here:
https://gosforthhandyman.com/skirting...
Here's some affiliate links to products I use or would consider using - read more about affiliate links at the bottom of this description:
Combi Drill & Impact Driver Pack:
https://gosforthhandyman.com/uk-links... (UK)
https://gosforthhandyman.com/us-links... (US)
SDS Drill:
https://gosforthhandyman.com/uk-links... (UK)
https://gosforthhandyman.com/us-links... (US)
Join the Member Zone for extra stuff:
https://members.gosforthhandyman.com
Buy locally sourced T-shirts and other lovely stuff from our little shop:
https://gosforthhandyman.com/shop/
Help me let you know about new vids - subscribe to my free newsletter here:
https://gosforthhandyman.com
TOOLS & PRODUCTS I USE: https://gosforthhandyman.com/products...
INSTA: Instagram: gosforthhandyman
I sometimes use affiliate links - these don’t cost you a penny and help to keep this channel going. Read more about affiliate links here - the fairest way of funding the internet: https://gosforthhandyman.com/affiliat... - thanks so much for your awesome support!
All content on this channel is exclusively owned by MacLellan Creative Limited. Copyright (c) 2021. All rights reserved.
#DIY #Joinery
8 سال پیش
در تاریخ 1395/03/31 منتشر شده
است.
55,139
بـار بازدید شده