DCC and Sound For Your LifeLike E-units (184)

Model Railroading
Model Railroading
27.7 هزار بار بازدید - 3 سال پیش - For at least the last
For at least the last 2 years folks have been asking me to do a video on installing DCC and sound in LifeLike E-units so here you go. This is a long video mainly due to all the wires that need to be run for the lights and power pickup. But that is to be expected with these "legacy" locomotive models produced before manufacturers were installing sockets for DCC let along decoders. I decided to use a Decoder Buddy Mini circuit board so I could experiment with different decoder brands but it also tends to actually make the installation easier. So sit back with a cup of something and enjoy the project, and you may want to even watch it in two sittings. To check out my other videos on installing LEDs, using Decoder Buddies, repairing axle gears, and the TCS dual prime mover decoder follow the links provided in this video.

Here are some links to websites for various materials mentioned. Note that many are available at local stores or from Amazon or eBay sellers.

Pre-wired LEDs on eBay   https://www.ebay.com/itm/L0805GW-20pc...

Misc LEDS from Streamlined Backshop  https://www.sbs4dcc.com

LEDs fro Richmond Controls  https://www.richmondcontrols.com

Misc electronics  https://www.allelectronics.com

Misc LEDs, small circuit boards, SMD resistors, Kapton tape  https://www.ngineering.com

Wiring harnesses, Kapton tape  https://www.tcsdcc.com

Other misc items available at local hobby shops, eBay, Amazon, hardware stores

Uhu tac putty
Zap Zip Kicker
Testors Clear Parts Cement
Locktite CA Gel
Makeup microbrush
3 سال پیش در تاریخ 1400/01/26 منتشر شده است.
27,701 بـار بازدید شده
... بیشتر