Lec 02: UMAT subroutines for Abaqus CAE
10.4 هزار بار بازدید -
4 سال پیش
-
You can download the supplementary
You can download the supplementary materials through Zenodo (https://zenodo.org/record/4448436)
The video was recorded as a part of the "Mechanics Lecture Series" of "The Mechanics Discussions" forum. This recording is of Lecture 02 on "UMAT subroutines for Abaqus CAE" and presented by Dr. Niraj K Jha (HASETRI, Mysore (India)).
Website of Dr. Niraj K Jha: https://sites.google.com/site/mechani...
Abstract of lecture
Dr. Jha will present a methodology for the development of UMAT in Abaqus CAE. In this regard, the lecture will focus on modeling of the damage in hyperelastic materials. In addition, the lecture will also demonstrate the development of UMAT as well. Over the course of the lecture, he will present theoretical formulations followed by code review. The intended audience of this lecture is Master / Ph.D. / Industry participants who are beginning to use UEL routines in Abaqus CAE.
The video was recorded as a part of the "Mechanics Lecture Series" of "The Mechanics Discussions" forum. This recording is of Lecture 02 on "UMAT subroutines for Abaqus CAE" and presented by Dr. Niraj K Jha (HASETRI, Mysore (India)).
Website of Dr. Niraj K Jha: https://sites.google.com/site/mechani...
Abstract of lecture
Dr. Jha will present a methodology for the development of UMAT in Abaqus CAE. In this regard, the lecture will focus on modeling of the damage in hyperelastic materials. In addition, the lecture will also demonstrate the development of UMAT as well. Over the course of the lecture, he will present theoretical formulations followed by code review. The intended audience of this lecture is Master / Ph.D. / Industry participants who are beginning to use UEL routines in Abaqus CAE.
4 سال پیش
در تاریخ 1399/10/29 منتشر شده
است.
10,485
بـار بازدید شده