Building the Zenith CH 750 Cruzer kit airplane: Top Wing Skins (part three)
331.9 هزار بار بازدید -
9 سال پیش
-
Assembling the wing kit of
Assembling the wing kit of the Zenith CH750 Cruzer kit airplane: Part Three: Positioning and clecoing the top wing skins. Drilling through pilot holes into wing spar.
Previous: Bottom Wing Skins: Part 2:
Building the Zenith CH 750 Cruzer kit...
Next: Riveting the bottom skins
FMI: http://www.zenithair.com
Note: This video is not meant to be used for instructional purposes. It is strictly informational. While most holes are supplied final hole size match drilled, some holes are pilot holes and need to be drilled to final hole size.
http://www.zenithair.com
#ch750sd #skyjeep #zenithair #BuildItFlyIt #ZenithSTOL #ch750 #STOLCH750 #kitplane #homebuilt #zenair #rivet #drill #6061 #airplanekit #airplaneassembly #buildaplane
Previous: Bottom Wing Skins: Part 2:
Building the Zenith CH 750 Cruzer kit...
Next: Riveting the bottom skins
FMI: http://www.zenithair.com
Note: This video is not meant to be used for instructional purposes. It is strictly informational. While most holes are supplied final hole size match drilled, some holes are pilot holes and need to be drilled to final hole size.
http://www.zenithair.com
#ch750sd #skyjeep #zenithair #BuildItFlyIt #ZenithSTOL #ch750 #STOLCH750 #kitplane #homebuilt #zenair #rivet #drill #6061 #airplanekit #airplaneassembly #buildaplane
9 سال پیش
در تاریخ 1394/01/04 منتشر شده
است.
331,993
بـار بازدید شده