24 Hour Digital Clock using 555 Timer and 4026 IC | Digital Clock | DLD Project
4.9 هزار بار بازدید -
4 سال پیش
-
Project Material & Circuit Diagram
Project Material & Circuit Diagram Link :
https://drive.google.com/drive/folder...
It is a 24-Hour Digital Clock that I have implemented in the 4th(Fall-2018) trimester in my graduation life under my course coordinator Dr. Shaheena Sultana in the course named Digital Logic Design(DLD) with the cooperation of my two responsive partners named Arefin Hasan Chowdhury and Moumita Dey Mouri. But from the beginning of this project, it is finished by my self hand. We have completed this as an outcome of the DLD course and I am so proud to have made this.
Supervised By : Dr. Shaheena Sultana
Created By : Md Saif Hossain
Partners : Arefin Hasan Chowdhury & Moumita dey Mouri
Implementation details :
- We have implemented this with the basic integrated circuit. First of all, we draw a circuit diagram in the Proteus simulator before implementation. Then we implement our circuit design on a breadboard step by step.
- At first, we have implemented our project with a 555 timer and 4026 IC. Then we have also tried with 4060 and 4026 IC. In the second trial, we have used a 32.768 kHz frequency crystal oscillator as an RTC chip.
- The IC 4026 is a driver of 7-Segment Display. So it must be used to control the 7-segment display. You can find our project in detail in the given below link.
Project Material & Circuit Diagram Link :
https://drive.google.com/drive/folder...
Component List:
(1) Seven segment display : 6 piece
(2) IC 4026 : 6 piece
(3) IC 7411 : 3 piece
(4) Diode : 10A07 = 2 piece
(5) Resistor :
- 330 = 1 piece
- 100k = 5 piece
- 470k = 3 piece
- 470/1k= (6*7)+8+5 = 55 piece
(6) Capacitor : 1.5 uF (1 piece)
(7) IC 555 Timer : 1 piece
(8) Push Button Switch : 2 piece
(9) LED (Red/Yellow) : 1 piece
(10) Battery (9v/12v) : 1 piece
https://drive.google.com/drive/folder...
It is a 24-Hour Digital Clock that I have implemented in the 4th(Fall-2018) trimester in my graduation life under my course coordinator Dr. Shaheena Sultana in the course named Digital Logic Design(DLD) with the cooperation of my two responsive partners named Arefin Hasan Chowdhury and Moumita Dey Mouri. But from the beginning of this project, it is finished by my self hand. We have completed this as an outcome of the DLD course and I am so proud to have made this.
Supervised By : Dr. Shaheena Sultana
Created By : Md Saif Hossain
Partners : Arefin Hasan Chowdhury & Moumita dey Mouri
Implementation details :
- We have implemented this with the basic integrated circuit. First of all, we draw a circuit diagram in the Proteus simulator before implementation. Then we implement our circuit design on a breadboard step by step.
- At first, we have implemented our project with a 555 timer and 4026 IC. Then we have also tried with 4060 and 4026 IC. In the second trial, we have used a 32.768 kHz frequency crystal oscillator as an RTC chip.
- The IC 4026 is a driver of 7-Segment Display. So it must be used to control the 7-segment display. You can find our project in detail in the given below link.
Project Material & Circuit Diagram Link :
https://drive.google.com/drive/folder...
Component List:
(1) Seven segment display : 6 piece
(2) IC 4026 : 6 piece
(3) IC 7411 : 3 piece
(4) Diode : 10A07 = 2 piece
(5) Resistor :
- 330 = 1 piece
- 100k = 5 piece
- 470k = 3 piece
- 470/1k= (6*7)+8+5 = 55 piece
(6) Capacitor : 1.5 uF (1 piece)
(7) IC 555 Timer : 1 piece
(8) Push Button Switch : 2 piece
(9) LED (Red/Yellow) : 1 piece
(10) Battery (9v/12v) : 1 piece
4 سال پیش
در تاریخ 1399/10/28 منتشر شده
است.
4,974
بـار بازدید شده