How to do Termite treatment, Drilling Method and Inside Foam, Apr 1
12.3 هزار بار بازدید -
2 سال پیش
-
CHECK OUT OUR STORE
CHECK OUT OUR STORE
https://blayespc.com
How to do Termite treatment, Drilling Method and Inside Foam. Today I did a scheduled treatment at a restaurant, then we completed preparations for a Termite treatment. I treated a home for termites activity, because of the amount of activity we treated outside of the home as well as inside in the the area of activity. I completed the termite treatment outside using the drilling method. First drilling thru pavement with a hammer drill 1/2 holes spaced out approx 10-12 inches apart along the affected side of the home. I then pumped in the solution and proceed by sealing with quick creek mix to seal the holes. I always let it sit a few minutes then I pass a broom over the patches to even it out. Once it dries if done correctly its almost unnoticeable.
I then treated the inside of the home in areas of activity by drilling 1/2 holes into the sheetrock about 10-12 inches apart as well and pumped in the termidor foam to treat for the termites. I patch the holes right away to avoid the foam from expanding out of the holes. I take special care to patch the holes as neat as possible and then clean up area as soon as treatment is completed.
CHECK OUT OUR STORE BLAYESPC.COM
Disclaimer: Im a professional Pest Control Technician with years of experience, the videos are demonstrations of my duties, it is important to consult a professional when using pesticides. Im in New Jersey, per our state guidelines, the label on the container is THE LAW.
If you need Pest Control Service and are in Northern New Jersey feel free to contact me,
Tel: 201-655-2701
Email: [email protected]
Website:http://blayespc.com
Check us out on: INSTAGRAM
https://blayespc.com
How to do Termite treatment, Drilling Method and Inside Foam. Today I did a scheduled treatment at a restaurant, then we completed preparations for a Termite treatment. I treated a home for termites activity, because of the amount of activity we treated outside of the home as well as inside in the the area of activity. I completed the termite treatment outside using the drilling method. First drilling thru pavement with a hammer drill 1/2 holes spaced out approx 10-12 inches apart along the affected side of the home. I then pumped in the solution and proceed by sealing with quick creek mix to seal the holes. I always let it sit a few minutes then I pass a broom over the patches to even it out. Once it dries if done correctly its almost unnoticeable.
I then treated the inside of the home in areas of activity by drilling 1/2 holes into the sheetrock about 10-12 inches apart as well and pumped in the termidor foam to treat for the termites. I patch the holes right away to avoid the foam from expanding out of the holes. I take special care to patch the holes as neat as possible and then clean up area as soon as treatment is completed.
CHECK OUT OUR STORE BLAYESPC.COM
Disclaimer: Im a professional Pest Control Technician with years of experience, the videos are demonstrations of my duties, it is important to consult a professional when using pesticides. Im in New Jersey, per our state guidelines, the label on the container is THE LAW.
If you need Pest Control Service and are in Northern New Jersey feel free to contact me,
Tel: 201-655-2701
Email: [email protected]
Website:http://blayespc.com
Check us out on: INSTAGRAM
2 سال پیش
در تاریخ 1401/01/15 منتشر شده
است.
12,377
بـار بازدید شده