DIY Fiber Laser Cutter V2 | Part 7: Raytools BM110 Auto-Focus Cutting Head
6.9 هزار بار بازدید -
7 روز پیش
-
If you want to build
If you want to build your own fiber laser cutter, join our Patreon group: Patreon: diyfiberlaser
Today we install the homing switches, set up the soft limits, and attach the Raytools BM110 auto-focus laser cutting head, along with the cables and hoses, to get all of the mass on the gantry in preparation to do the Leadshine servo motor tuning.
-------------------------
If you need laser components for your project, check out Sky Fire at https://alleriastore.com
You can receive a 5% discount on laser components use the code: “FROMTRAVIS”
(this discount applies to all products except for the laser machines)
--------------------------
My website: https://www.id3ntitycrisis.com
My design portfolio: https://www.id3ntitycrisis.com/portfolio
Today we install the homing switches, set up the soft limits, and attach the Raytools BM110 auto-focus laser cutting head, along with the cables and hoses, to get all of the mass on the gantry in preparation to do the Leadshine servo motor tuning.
-------------------------
If you need laser components for your project, check out Sky Fire at https://alleriastore.com
You can receive a 5% discount on laser components use the code: “FROMTRAVIS”
(this discount applies to all products except for the laser machines)
--------------------------
My website: https://www.id3ntitycrisis.com
My design portfolio: https://www.id3ntitycrisis.com/portfolio
7 روز پیش
در تاریخ 1403/04/12 منتشر شده
است.
6,944
بـار بازدید شده