PVC Bending No Kink - Piping Bending Using Heat Gun
170.6 هزار بار بازدید -
2 سال پیش
-
Get a good heat gun,
Get a good heat gun, not a hair dryer
PVC becomes bendable around the boiling point of water – 200F or 100C.
People use heat guns, gas torches or stoves.
The secret to bending PVC without kinking is to not allow the kink to rise.
I use a secured board on top of the expected bending point to prevent any rise.
I have seen some advice of using tape over the bend point and filling the pipe with sand up to the bend point, but that sounds like too much work.
Actually, the easiest way is to buy pre-bended PVC pipe in 90s, 45s and 30s.
Hi! I’m Blair Gilbert, aka MR. HARDWARE. As a third-generation hardware store owner, licensed builder, and finish carpenter, my mission is to help you “do it right the first time!” On this site, I share expert home and yard DIY advice in over 200 videos. I can fix and repair your problems.
Learn more at: https://mrhardware.com/
Subscribe: @mrhardware1
PVC becomes bendable around the boiling point of water – 200F or 100C.
People use heat guns, gas torches or stoves.
The secret to bending PVC without kinking is to not allow the kink to rise.
I use a secured board on top of the expected bending point to prevent any rise.
I have seen some advice of using tape over the bend point and filling the pipe with sand up to the bend point, but that sounds like too much work.
Actually, the easiest way is to buy pre-bended PVC pipe in 90s, 45s and 30s.
Hi! I’m Blair Gilbert, aka MR. HARDWARE. As a third-generation hardware store owner, licensed builder, and finish carpenter, my mission is to help you “do it right the first time!” On this site, I share expert home and yard DIY advice in over 200 videos. I can fix and repair your problems.
Learn more at: https://mrhardware.com/
Subscribe: @mrhardware1
2 سال پیش
در تاریخ 1401/05/16 منتشر شده
است.
170,638
بـار بازدید شده