2.16 Design Procedure of Knuckle joint Part 1_Design against Static Load_Machine Design I
5 هزار بار بازدید -
4 سال پیش
-
This lecture covers, some of
This lecture covers, some of the steps from the Procedure of Knuckle joint.
Steps covered in this lecture are,
Step 1: Calculate the diameter of Rod
Step 2: Calculate the enlarged diameter of Rod
Step 3: Calculate a and b.
step 4: Calculate the diameter of the pin based on Shear stress and Bending stress.
Steps covered in this lecture are,
Step 1: Calculate the diameter of Rod
Step 2: Calculate the enlarged diameter of Rod
Step 3: Calculate a and b.
step 4: Calculate the diameter of the pin based on Shear stress and Bending stress.
4 سال پیش
در تاریخ 1399/05/15 منتشر شده
است.
5,068
بـار بازدید شده