Laser cutting a storage box holder in 3mm MDF
124 بار بازدید -
8 سال پیش
-
I wanted to have easy
I wanted to have easy access to my caddy storage box. I figure out that it would be a ggod idea to make a frame holding 5 boxes. The frame laser cut out of 3mm MDF. 4mm would have been better, but the next thickness was 5mm. The laser can't cut it in one pass. The frames can be attached to gether side by side. The storage boxes slides in the holder very easily.
8 سال پیش
در تاریخ 1395/09/12 منتشر شده
است.
124
بـار بازدید شده