MTCRE : نحوه پیکربندی Static Route در تجهیزات میکروتیک
96 بار بازدید -
پارسال
-
Module 1 : Static Routing
Module 1 : Static Routing
More specific routes
ECMP
How to force gateway over specific interface
Gateway reachability check and route distance
Routing mark and route policy
Recursive next-hop and scope/target-scope usage
Module 2 : Point to Point Addressing
Point to Point address configuration
Module 3 : VPN
What is VPN?
Different types of VPN
Site to site connectivity with tunnels
IPIP, EoIP, PPTP, SSTP, L2TP, PPPoE
VLAN and it's usage
QinQ implementation
VLAN and managed switch
VLAN and switch chip configuration on RouterBOARDs
Module 4 : OSPF
What is OSPF?
How OSPF protocol works
Hello protocol
Database distribution and LSA types explained
OSPF network structure
Areas
Router types
OSPF neighbors and neighbor states (DR and BDR election)
External Route Distribution methods (type1, type2)
Interface cost and interface types (broadcast, NBMA, etc.)
SPT calculation algorithm
OSPF and multicast (problems with NBMA)
Stub, NSSA and area ranges (route aggregation)
Virtual links, usage and limitations
OSPF routing filters and limitations
Keywords
Yaser Rahmati , MikroTik, Rahmati Academy, MTCRE
کلمات کلیدی
یاسر رحمتی ، آکادمی رحمتی ، میکروتیک
پارسال
در تاریخ 1402/05/09 منتشر شده
است.
96
بـار بازدید شده