Open-E DSS V6 iSCSI-Failover and MPIO with ESXi 5.0
48 بار بازدید -
7 سال پیش
-
- Setup the Open-E DSS
- Setup the Open-E DSS V6 iSCSI Targets on both the Source and Destination
- Configure the Open-E DSS V6 Auto Failover service
- Enter the Virtual IP Addresses on both the Source and Destination
- Connect the ESXi 5.0 via its initiator to the Open-E DSS V6 Virtual IP Addresses
- Configure the MPIO settings on ESXi 5.0
© http://www.open-e.com
7 سال پیش
در تاریخ 1397/02/08 منتشر شده
است.
48
بـار بازدید شده