CNC Plasma Cutting Machine Ride Along
85 بار بازدید -
6 سال پیش
-
We taped a video camera
We taped a video camera to the gantry on our Torchmate CNC Plasma Cutting Table for a ride along while it was cutting. Here you can see the plasma cutter going up and down using the Arc Voltage Torch Height Control. The plasma cutter fires at a higher pierce height and then drops to the proper cut height prior to moving. In the video we are cutting out the plates we use to build the Torchmate 2x2 CNC Prototyping System Water Tables out of 3/16" thick mild steel. For more information go to http://www.torc
6 سال پیش
در تاریخ 1397/09/12 منتشر شده
است.
85
بـار بازدید شده