Reduce Cycle Time with a Multi-Part Fixture on the Haas UMC-750P - Long Version
87 بار بازدید -
6 سال پیش
-
Watch as Senior Applications Engineer
Watch as Senior Applications Engineer John Nelson takes you step-by-step through his design, machining, and use of a 28-part fixture on a Haas UMC-750P. By making use of the HRT210 rotary on the machine, and adding a Haas Tooling Block, John was able to make a high-production job much more productive, shaving 23.5% off each part's cycle time. If he were making 1000 parts, that's over 16 hours of machine time saved! Multiply that by your shop rate and you'll see that the dollar savings is real!
Don’t mis
6 سال پیش
در تاریخ 1397/04/06 منتشر شده
است.
87
بـار بازدید شده