Alarm F Troubleshooting for FANUC CNC Servo Amplifier
1.1 هزار بار بازدید -
7 سال پیش
-
Servo Amplifier Alarm F
CNC
Servo Amplifier Alarm F
CNC Alarms DS0609, SV0601
Applies to Alpha i Servo
Alarm F on the Alpha i servo amplifier indicates a failure of the external cooling fan mounted on the heatsink.
When the servo amp faults out for a bad external fan, it does it in two stages. When it first detects a fan problem, the amp goes into a warning state, and if the fan issue hasn't self-corrected within one minute, it goes into an alarm state.
Alarm DS 609 is generated by the CNC when it detects that a servo amp is
7 سال پیش
در تاریخ 1396/10/20 منتشر شده
است.
1,177
بـار بازدید شده