Routing a Small Cut Out Piece: Dremel Rotary Tool
258 بار بازدید -
7 سال پیش
-
Routing a small cut out
Routing a small cut out piece using a Dremel 300 Series, Shaper/Router Table # 231 and a Piloted Beading Bit #612
Running the edges of small pieces of wood is easy with the Dremel system. For this demonstration we're using a Dremel 200 series tool, the shaper router table and a #612 piloted beating bit. In the shaper router table you can also use a drum or 100 series tool. If you choose to use a Dremel 300 or 400 series XPR tool please contact your Dremel expert for the required adapter.
To start first i
7 سال پیش
در تاریخ 1396/03/19 منتشر شده
است.
258
بـار بازدید شده