Quickmill Stacked Drilling with Hydraulic Pressure Foot
98 بار بازدید -
8 سال پیش
-
Watch the Quickmill Annihilator machining
Watch the Quickmill Annihilator machining center drill through a stack of tubesheets at 36 inches per minute (.914m/min).
A combination of the Quickmill's hydraulic pressure foot and high pressure coolant system allows for fast production times in large part stacking applications.
8 سال پیش
در تاریخ 1395/09/24 منتشر شده
است.
98
بـار بازدید شده