Part 3 - Preparing the phototools
167 بار بازدید -
6 سال پیش
-
We use laser photoplotters in
We use laser photoplotters in a temperature and humidity-controlled darkroom to make the films we will use later to image the PCBs. The photoplotter takes the board data and converts it into a pixel image. A laser writes this onto the film. The exposed film is automatically developed and unloaded for the operator. The films are ready now for the PCB fabrication process.
6 سال پیش
در تاریخ 1397/07/13 منتشر شده
است.
167
بـار بازدید شده