Band Saw Upgrades / New HPL Blade Guides Table
104 بار بازدید -
5 سال پیش
-
After using my homemade band
After using my homemade band saw for a year, I’ve decided I should make some improvements. Back when I built it I used teflon to make the blade guides, but I don’t think this material is hard enough for this purpose.
I’ve also noticed the table is bent because of all the tension it has withstood due to it being made with two plywood pieces glued together and a HPL sheet.
5 سال پیش
در تاریخ 1398/02/20 منتشر شده
است.
104
بـار بازدید شده