Making electric Roller Bender Part part 3/3
71 بار بازدید -
5 سال پیش
-
If you didn't see how
If you didn't see how I built this machine, you can do it here: https://www.youtube.com/playlist?list=PLtp0qX2WkOnWPX41pclLIcl4Sg3kbcE1b
After doing this test I deduced a couple of conclusions which can be helpful for you.
9RPM It's definitely too slow. I suppose 15 or 20RPM would be a better solution. If I find time someday, I'll change pulley's. It causes that bender will bend a materia
5 سال پیش
در تاریخ 1398/03/13 منتشر شده
است.
71
بـار بازدید شده