SolidWorks tutorial Geneva mechanism (motion Study)
1 هزار بار بازدید -
8 سال پیش
-
in this tutorial i will
in this tutorial i will sketch every parts of Geneva mechanism and animation,below are the parts list.
1)Geneva wheel
2)Locking disk
3)Base
4)Crank
5)Shaft
6)Pin
and i will Assemble and animate the Geneva mechanism in Solidworks.
Please Subscribe our channel for more projects in Solidworks.
The Geneva drive or Maltese cross is a gear mechanism that translates a continuous rotation into an intermittent rotary motion. The rotating drive wheel has a pin that reaches into a slot of the driven wheel advancing i
8 سال پیش
در تاریخ 1395/11/04 منتشر شده
است.
1,011
بـار بازدید شده