Early Run of My V-Twin model Engine by Terry Mayhugh
319 بار بازدید -
8 سال پیش
-
Just completed ... mostly machined
Just completed ... mostly machined on a Tormach PCNC mill with SolidWorks/SprutCam CAD/CAM plus manual lathe work on the cast iron cylinders, pistons, rings and crank. One inch bore with 1.25 inch stroke. Built entirely from material from a local scrap yard. Plan set available from Jerry-Howell.com. Mayhugh engine V-twin vtwin tormach howell
8 سال پیش
در تاریخ 1395/11/19 منتشر شده
است.
319
بـار بازدید شده