Rolling Process / Cold Rolling Process In Ansys Workbench
201 بار بازدید -
7 سال پیش
-
ANSYS Workbench Software is used
ANSYS Workbench Software is used to Simulate the Problem.
The Roller Materials are Titanium alloy and the billet material name is Alluminium Alloy. Coefficiant of friction used is of .34 , Augmented Langrange method is used to solve, further Weak Spring and Large Deformation is set to be on.
About 17 iterations is done to achieve the results,
The billet is moving up during the process is because the z displacement is set to be free with x Displacement .The question arises that why billet is not moving down
7 سال پیش
در تاریخ 1396/12/04 منتشر شده
است.
201
بـار بازدید شده