Getting Started with SolidCAM iMachining - Video 1
291 بار بازدید -
7 سال پیش
-
This is Session 1 of
This is Session 1 of Getting Started with iMachining Professor - an extensive tutorial series to provide you knowledge and practice with iMachining. This video illustrates the CAM-Part definition process and minimum requirements for making a new iMachining operation. The machining is performed on a 3-Axis Haas SS. The Coordinate System, Stock and Target model are defined as shown. The machine and work material parameters are defined for the iMachining Database. A simple closed pocket is selected for geometr
7 سال پیش
در تاریخ 1396/10/26 منتشر شده
است.
291
بـار بازدید شده