DLP 3D Printer Build Part 1: The FlexVat
103 بار بازدید -
6 سال پیش
-
Here I assemble the resin
Here I assemble the resin vat for my self-sourced DLP printer. The frame is printed PLA, the non-stick resin surface is laser-cut FEP, and the gasket is laser-cut silicone. For updates on this build, check out www.christianbehling.com
This "FlexVat" was designed by firecardinal on Thingiverse and can be found here: http://www.thingiverse.com/thing:1244716
This printer is based on the open-source LittleRP: http://www.littlerp.com/
Song: Evenings by Sekuoia
6 سال پیش
در تاریخ 1397/07/24 منتشر شده
است.
103
بـار بازدید شده