A better way to make graphite crucibles and cone molds
40 بار بازدید -
6 سال پیش
-
A few years back when
A few years back when I got started making graphite products. I did a video on the process I used. I was wasting as much graphite as I sold.
I started breaking down the billets on the bandsaw into cubes. There was a learning curve and figured out that if i set the block in the vise and drill and cut without moving the block, every crucible was centered and came out good.
I just figured I would show the process I use making it clear there are probably much better machines and processes.
6 سال پیش
در تاریخ 1397/08/29 منتشر شده
است.
40
بـار بازدید شده