Compressed Air Briggs and Stratton
138 بار بازدید -
7 سال پیش
-
A 2hp Briggs and Stratton
A 2hp Briggs and Stratton engine I modified to run on compressed air.
I use the pipe threads in the exhaust port to connect the air supply into. I had to use shims to increase the spring pressure to keep the (new inlet valve) against the seat, due to the 120psi air trying to push it open. The new camshaft has 4 lobes, 2 for inlet, 2 for exhaust. The inlet has very little duration or lift. The engine puts out a lot of torque, and will run at 1100rpm down to about 200rpm. It will empty a 10 gallon air pig in
7 سال پیش
در تاریخ 1396/04/26 منتشر شده
است.
138
بـار بازدید شده