How to perform a compression test with a scope (Verus-Vantage)
105 بار بازدید -
6 سال پیش
-
Relative compression test using the
Relative compression test using the Snap-On Verus. You do not need a Snap-on scope to do these tests. The same procedure can be followed using any Lab Scope.
Testing procedures shown:
- how to use starter current to determine cylinder compression
- how to synchronize the starter current pattern with an ignition firing event to determine exact cylinder location
Tools used:
- Lab Scope
- Low amp probe
- High amp probe (preferred)
- Secondary Ignition Pick-up
Related Videos:
- How to perfor
6 سال پیش
در تاریخ 1397/03/04 منتشر شده
است.
105
بـار بازدید شده