Do It Yourself 20 Ton Hydraulic Forging Press
204 بار بازدید -
7 سال پیش
-
I needed a press for
I needed a press for the shop to use for blacksmithing. A local store had a 20 ton air assist hydraulic jack on sale and I had a lot of thick wall steel tube, angle iron, and steel plate around the shop. Within a few hours I had welded up the press shown in this video.
7 سال پیش
در تاریخ 1396/03/01 منتشر شده
است.
204
بـار بازدید شده