Part 12 - Electroless copper deposition
126 بار بازدید -
7 سال پیش
-
The first step in the
The first step in the plating process is the chemical deposition of a very thin layer of copper on the hole walls. The operator clamps the production panels into the jigs. The line is fully computer controlled and the panels are carried through a series of chemical and rinsing baths by the overhead crane. Almost all PCBs with 2 or more copper layers use plated through holes to connect the conductors between the layers. A good connection needs about 25 microns of copper on the walls of the holes.
http:/
7 سال پیش
در تاریخ 1396/03/11 منتشر شده
است.
126
بـار بازدید شده