ST-55 Cutting Demo - Haas Automation CNC Lathe Turning
110 بار بازدید -
6 سال پیش
-
Do you need heavy cutting
Do you need heavy cutting ability and serious rigidity in a large-bore turning center? Then Haas Automation's ST-50 and ST-55 turning centers should fit the bill.
In this demo, we start with a workpiece weighing in at 2000 pounds! Starting with roughing cuts at 0.25" DOC and 0.025" per rev, we're removing lots of material quickly. Even while profiling the curved surfaces, the button tool is taking a good-sized cut, with a 0.112" stepover and 0.050" per rev following a dynamic toolpath. And by the time we'
6 سال پیش
در تاریخ 1397/04/16 منتشر شده
است.
110
بـار بازدید شده