Boring Head Tips (Part 1 of 2) - Tormach CNC
70 بار بازدید -
6 سال پیش
-
Boring Head: http://goo.gl/p87Ek
Tormach machinist
Boring Head: http://goo.gl/p87Ek
Tormach machinist Mike Corliss demonstrates the basic setup procedure for using a Tormach Boring Head to bore out the inner diameter of a hole. The boring head can be dial adjusted to bore both large or small diameters as well as oddball sizes. At 3:47, a telescoping gauge is used to measure the inner diameter of the hole.
Part 2 of this video series demonstrates how to use a Boring Head to turn the outer diameter of a part. http://goo.gl/TWt0v
Click the link above to ch
6 سال پیش
در تاریخ 1397/05/17 منتشر شده
است.
70
بـار بازدید شده