ropelab

30seconds with RopeLab: #8 3:1 to 5:1 with single pulleys

00:21

30seconds with RopeLab: #8 3:1 to 5:1 with single pulleys
Rope Abrasion Tests

1:54

Rope Abrasion Tests
30seconds with RopeLab: #22 Rigging plates.

00:28

30seconds with RopeLab: #22 Rigging plates.
30s @ RopeLab: #42 Rethreaded Bunny Ears Figure of 8.

00:34

30s @ RopeLab: #42 Rethreaded Bunny Ears Figure of 8.
RopeLab equipment info series: Ep 2 - Rope

24:46

RopeLab equipment info series: Ep 2 - Rope
Mechanical Advantage: 2:1 or 3:1

3:20

Mechanical Advantage: 2:1 or 3:1
Rethreaded Alpine Butterfly

1:14

Rethreaded Alpine Butterfly
30s @RopeLab: #35 Load Cell sampling rates

00:30

30s @RopeLab: #35 Load Cell sampling rates
Figure 8 Bunny Ears knot test

1:02

Figure 8 Bunny Ears knot test
30s @ RopeLab: #27 Twist or no twist?

00:32

30s @ RopeLab: #27 Twist or no twist?
30s @ RopeLab: #38 Knot strength?

00:38

30s @ RopeLab: #38 Knot strength?
ASAP Drops 250kg

00:37

ASAP Drops 250kg
30seconds with RopeLab: #14 Only 140kg on a rope grab?

00:31

30seconds with RopeLab: #14 Only 140kg on a rope grab?
30s @ RopeLab: #48 Bunny Ears F8 with forward loop.

00:26

30s @ RopeLab: #48 Bunny Ears F8 with forward loop.
30seconds with RopeLab: #15 T-method for TMA.

00:32

30seconds with RopeLab: #15 T-method for TMA.
Level1 Rope Access Knots

4:03

Level1 Rope Access Knots
Rope Access: Rescue from ascent

4:00

Rope Access: Rescue from ascent
30seconds with RopeLab: #5 Directional8, why bother?

00:38

30seconds with RopeLab: #5 Directional8, why bother?
"EDK": overhand & fig8 pull test

2:25

"EDK": overhand & fig8 pull test
Rig for Lower: Munter + ASAP

3:53

Rig for Lower: Munter + ASAP
Big Alpine Butterfly: drop testing differential loading of strands

00:42

Big Alpine Butterfly: drop testing differential loading of strands
30s @ RopeLab: #46 Rope protectors

00:28

30s @ RopeLab: #46 Rope protectors
Coil a rope: mid-point loop

2:35

Coil a rope: mid-point loop
30s @ RopeLab: #43 Three Eared Bunny 8.

00:29

30s @ RopeLab: #43 Three Eared Bunny 8.
Same Petzl Shunt on 3 different ropes

00:10

Same Petzl Shunt on 3 different ropes
CanyonLux-Devices

2:39

CanyonLux-Devices
GriGri Drop Tests

2:01

GriGri Drop Tests
30s @ RopeLab: #32 Carabiner WLL

00:29

30s @ RopeLab: #32 Carabiner WLL
30s @ RopeLab: #47 Rope protection #2, wire strops

00:46

30s @ RopeLab: #47 Rope protection #2, wire strops
30s @ RopeLab: #40 Suspension Syndrome

00:32

30s @ RopeLab: #40 Suspension Syndrome
30seconds with RopeLab: #6 Prusiks on double ropes

00:20

30seconds with RopeLab: #6 Prusiks on double ropes
RopeLab - Physics for Roping Technicians

1:04

RopeLab - Physics for Roping Technicians
30seconds with RopeLab: #16 Factor of Safety = 2.5

00:29

30seconds with RopeLab: #16 Factor of Safety = 2.5
Figure-of-8, Bunny Ears, Rethreaded

1:31

Figure-of-8, Bunny Ears, Rethreaded
RopeLab equipment information series: Episode 1 - Carabiners

28:24

RopeLab equipment information series: Episode 1 - Carabiners
Transport-Hitch

00:25

Transport-Hitch
Bowline loading

2:27

Bowline loading
SMC Vector Gin Pole: Setup

9:26

SMC Vector Gin Pole: Setup
30seconds with RopeLab: #19 Main & Backup or Dual Main?

00:25

30seconds with RopeLab: #19 Main & Backup or Dual Main?
Petzl ASAP'Sorber slow pull test.

00:33

Petzl ASAP'Sorber slow pull test.
Two point anchor loading

5:56

Two point anchor loading
Three person VR

1:16

Three person VR
30s @ RopeLab: #49 Whoopie Sling foot loop.

00:32

30s @ RopeLab: #49 Whoopie Sling foot loop.
Figure-of-8: On a bight & Bunny Ears

1:24

Figure-of-8: On a bight & Bunny Ears
Yates 611 Rescue Load Limiters

00:26

Yates 611 Rescue Load Limiters
Steel carabiner destructive test

00:32

Steel carabiner destructive test
Mid Transfer Rescue - IRATA level 3 training

17:22

Mid Transfer Rescue - IRATA level 3 training
Set-of-four configurations

2:05

Set-of-four configurations
ASAP drops 100kg with ASAP high or low.

00:24

ASAP drops 100kg with ASAP high or low.
The Physics of GriGri | When does No-Hands Belay Fail?

20:06

The Physics of GriGri | When does No-Hands Belay Fail?
30s @ RopeLab: #33 Fall Factor = fall distance / rope in service.

00:30

30s @ RopeLab: #33 Fall Factor = fall distance / rope in service.
30seconds with RopeLab: #17 Pulley efficiency

00:29

30seconds with RopeLab: #17 Pulley efficiency
30s @ RopeLab: #50 Friction alone can hold 272kg/600lbs.

00:31

30s @ RopeLab: #50 Friction alone can hold 272kg/600lbs.
30seconds with RopeLab: #9 Convert to a Munter Hitch

00:21

30seconds with RopeLab: #9 Convert to a Munter Hitch
30seconds with RopeLab: #3 GriGri and semi-static rope?

00:30

30seconds with RopeLab: #3 GriGri and semi-static rope?
30seconds with RopeLab: #24 Why opposite/opposed gates?

00:32

30seconds with RopeLab: #24 Why opposite/opposed gates?
30seconds with RopeLab: #25 Fig8 + stopper knot?

00:30

30seconds with RopeLab: #25 Fig8 + stopper knot?
30seconds with RopeLab: #13 Alpine Bunny Knot.

00:30

30seconds with RopeLab: #13 Alpine Bunny Knot.
3 different Petzl Shunts on 11mm Sterling HTP

00:11

3 different Petzl Shunts on 11mm Sterling HTP
30s @ RopeLab: #45 Belay from the belay loop.

00:30

30s @ RopeLab: #45 Belay from the belay loop.