30K Yacht Restoration Project | DIY Boat Rebuild
DIY Boat Restoration Project with no interior | Full Tour - EP.2
AlexSeal Boat Paint - Rolled On !
Making NEW BULKHEAD for our unfinished BOAT Project - EP.87
ALEXSEAL Marine PAINT Wet Sand and Final POLISH - EP.77
We CREATE a NEW BATHROOM on our BOAT - EP.88
Removing Volvo Penta D4 Engines | DIY Boat Restoration - EP.4
PAINTING our BOAT with ALEXSEAL using a ROLLER - EP.74
Boat Restoration Project UK - Installing new portlights - EP.3
DIY YACHT Restoration - NEW Plywood DECK CORE - EP.52
We DESIGN a NEW Sliding ROOF System for our BOAT - EP 76
We FIT a NEW BULKHEAD on our BOAT - EP.89
Project BOAT - Glassing in New CORE and BULKHEAD - EP.86
Volvo Penta D4-260 Start Up Engine Test Run
Fastmount Panel Clips | Boat Restoration project - EP 17
BOAT Restoration Project - Adding strengthening for NEW Windows - EP.75
New WINDOWS on our Boat RESTORATION Project - EP.81
YACHT Rebuild Project - We Drill a HOLE in our HULL - EP.46
We FIND more PROBLEMS on our PROJECT REBUILD BOAT - EP.90
Boat Restoration Project - Releasing the Bed Mould EP 15
DIY BOAT Restoration - GEL COAT Repairs and DECK CLEAN - EP.57
Finishing REPAIRS to our ENGINE bay COVER - BOAT Restoration Project - EP.70
BOAT Restoration PROJECT - NEW Chain Locker BULKHEAD Fitted - EP.47
New Chain Locker Fitted | DIY Boat Restoration - EP.34
Planar Diesel Heater | Unboxing and Install - EP.12
Volvo Penta D4 260 Engines | Will they start up after 5 Years - EP.5
BOAT Restoration PROJECT - EP.71
Can we FIX these PROBLEMS on our PROJECT REBUILD BOAT - EP.91
Sealine BOAT Rebuild - Bonding the NEW WINDOW Frames - EP.82
Boat Restoration Project - Final Bed Mould is Ready - EP 23
BOAT Restoration PROJECT - Removing the WINDOWS ready for painting the ROOF - EP.59
REBUILDING a £30,000 BOAT with NO INTERIOR - EP.84
DIY YACHT Restoration - Shrink wrapped for the winter - EP.58
Renovating Sealine Factory Fibreglass Shower Mould - EP.41
DIY YACHT Restoration Project - Making a NEW Chain Locker MOULD - EP.68
We Apply ALEXSEAL Primer to our DIY PROJECT BOAT - EP.73
We FIT the NEW ENGINE BAY cover - DIY BOAT Restoration - EP.72
DIY Boat Project - Adding fibreglass bed mouldings - EP.7
Polishing Fibreglass Plug for Bed Mould - Boat Rebuild Project - EP 13
Glassing the Anchor Chain Locker on our Project Motor Boat - EP.35
We RE-DESIGN the COCKPIT - PART TWO - EP.79
Motor Boat RESTORATION - Our DECK is FULL of HOLES - EP.53
Templating NEW WINDOWS - DIY Motor BOAT REBUILD - EP.62
We use ASTON MARTIN VENTS on our DIY PROJECT BOAT - EP.80
Motor BOAT REBUILD - Can we fix the Sealine Factory Shower Pattern - EP42
We make a fibreglass mould | Boat Restoration - EP 14
BOAT Restoration - FAIRING A Pillars and Cockpit Spring CLEAN - EP.66
Boat Restoration Project - Adding fibreglass mouldings - EP.6
Ready for our first fibreglass part - Yacht Restoration Project EP 21
Making a plug for fibreglass moulding - Sealine SC35 Restoration - EP 8
We fill our A Pillar with Epoxy Resin ! - Yacht Restoration Project - EP.39
We look at Lightweight Plywood for our Boat Rebuild Project - EP 16
Install new Boat floor - Sealine Rebuild Project - EP 26
YACHT Restoration PROJECT - NEW SHOWER Mould - EP.49
Our ENGINE BAY cover is DESTROYED - DIY BOAT Restoration - EP.69
Our new Portlight Leaks - DIY Boat Rebuild Project - EP.40
Making the Bed Mould for our Boat Restoration Project - EP 18
We RE-DESIGN the COCKPIT on our PROJECT BOAT - EP.78
YACHT Shower Mould, did it WORK - SEALINE BOAT Renovation Project - EP.45
